Filter By:
- Parts & Accessories (142)
- Tires (1002)
- Tubes: All Sizes/Types (258)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tires/Tubes
The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing.
A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections.
Who Rides This Tire?
Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain.
Where Does This Tire Perform Best?
Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails.
Go Faster, Go Bigger
The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity.
For Downhill, Enduro, and trail Dominance
Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions.
Construction
A dual-ply, 120TPI construction, the 2x120TPI casing is supple and fast rolling with improved traction while providing high levels of support
Grip3 Compound
Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear.
Protection
EN:Wall – A butyl layer located within the casing ply that provides defence to cut and abrasion as well as providing extra sidewall support.
Troy Brosnan's go-fast signature tire.
- Ideal for dry, fast trails
- Tubeless compatible
- Wide Trail casing optimized for 30-35mm rims
Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.
A classic MTB tire with large, widely spaced knobs suitable for all conditions.
- ISO: 406
- Bead: Wire
- PSI: 65
$2.99
Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag.
- Kit contains (6) pre-glued 1? patches and a scuffer.
$3.99
An easy to use dipstick that allows you to check the sealant level in your tires without having to pop the bead. With the valve positioned at 6 o'clock remove the valve core, insert the dipstick and read the sealant level.
- 5-pack
$3.99
Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.
$4.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
$4.95 - $5.95
- Snap-On high-Pressure plasticized nylon protects tube from abrasion
- Older stock is yellow, New stock is black with halo logos
$4.99
- Includes 6 self-adhesive patches (25mm) and sand paper to scuff the tube surface for proper adhesion
- Suitable for all kinds of punctures
- Convenient plastic case is compact and easy to carry on every ride
- No glue needed
$4.99
Pack of 10 replacement tubeless plugs for the Tubeless Kit and Classic Tubeless Kit.
$4.99
Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.
$4.99 - $30.99
- Valve Type: Schrader
- Valve Core: Removable
- Butyl rubber
- Wall Thickness: 0.9mm
$4.99 - $7.99
- Butyl rubber
- Economy tube
- Wall thickness: 0.9mm
- Removable valve core
$5.00
- The Pressure Relief Valve Stem Nut has been designed to ensure that an improper tubeless tape job doesn’t result in a damaged rim.
- If the tubeless seal between tire’s air chamber and the rim’s cavity is breached, the rim’s cavity can become pressurized resulting in a pressurized rim and potential delamination of the rim’s sidewall. The Pressure Relief Valve Stem Nut prevents this from happening by creating an escape for the air via fluted reliefs on the inner diameter of the nut.
- Air escaping from these ports, indicates a compromised tubeless seal.
- Recommended for all tubeless SES wheelsets as well as other brand road tubeless wheelsets.
- Each order includes two nuts, enough for one wheelset.
$5.00 - $23.99
- Premium alloy presta valve caps in an array of colors
$5.99
Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).
$5.99 - $19.99
- Valve: Presta
- Valve core: Removable
- Butyl rubber
- Wall thickness: 0.9mm
$5.99 - $9.79
- Valve type: Schrader
- Valve core: Removable
- Butyl rubber
- Wall thickness: 0.9mm
$5.99 - $39.59
- Valve type: Schrader
- Valve core: Removable
- Valve stem: Smooth
- Butyl rubber
- Wall thickness: 0.9mm
$5.99
- Butyl rubber
- Removable valve core
- Schrader valve
- Wall thickness: 0.9mm
$5.99
- Butyl rubber
- Economy tube
- Schrader valve
- Wall thickness: 0.9mm
$6.00
This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.
$6.49
- Valve type: Schrader
- Valve core: Removable
- Butyl rubber
- Wall thickness: 0.9mm
$6.49
- Valve type: Schrader
- Valve core: Removable
- Butyl rubber
- Wall thickness: 0.9mm
Page 1 of 47
Next page